Suntec Laser Technology Co., Ltd.

Synrad CO2 Laser

Synrad CO2 Laser
Related Products
  • Max Fiber Laser

    FeatureShort turning on time, short pulse, high peak power, wide repetitive frequency range.There is no leak when the lasers are switched off.There is no shadow and Virtual circuit when process the sp...

  • IPG Fiber Laser

    YLP SeriesHigh Energy, Pulsed Ytterbium Fiber LasersIndustrial Module UnitsThe YLP Series is maintenance-free MOPA and Q-switched pulsed Ytterbium fiber lasers designed for OEM applications. These las...

  • USA Diode Pump

    Northrop Brumman’s CW pumped RBAT laser module is the ideal building block for any DPSS Laser system. Design flexibility allows for a variety rod lengths and diameters to be used in both resonator an...

Synrad' s original "all-metal" tube technology opened the door for sealed CO2 lasers in many industrial applications.  After 20 years, it remains the industry standard for performance, reliability, long lifetime and low cost.

The laser tube is a rigid box structure design that provides an ultra-stable platform for the laser resonator.  Synrad’s 48-series tubes are mounted into an H-shaped heat sink extrusion that also serves as the chassis for the drive electronics.  This guarantees that the laser will withstand the harsh requirements of modern industrial environments.

The all-metal sealed tube design and proprietary manufacturing process ensure high gas purity, essential for long operating lifetimes.  With 100,000 Synrad lasers operating worldwide, Synrad is the only CO2 laser manufacturer that can boast of proven operating lifetimes in excess of 45,000 hours (at which time, a simple and inexpensive gas refill returns the laser to full operation).

Synrad lasers can be operated from 0-100% duty cycle, with laser power adjusted using a pulse width modulation (PWM) control.  The laser is controlled directly with a TTL signal (rear-mounted BNC connector).  Alternatively, a DB-9 connector provides remote access to all laser functions, including laser control, fault conditions monitoring, remote interlock, and failure shutdown options.

All 48-series lasers operate from standard 30VDC power supplies, and can be either fan-cooled (48-1 and 48-2 models), or water cooled.  Synrad' s 48-series lasers are ideal for incorporation into marking, engraving, and small cutting systems, where performance, low price and high reliability are essential.
Leave a Message Email Us

we will contact you within 24 hours.

Contact Us
  • TEL:+86-755-23572117
  • ADDRESS:709, Meiying Intelligence Bay, 107 National Road, Fuyong Residential District, Bao'an, Shenzhen, Guangdong, China, 518128